| Item |
Item Description |
Unit |
Qty. |
| M-410 |
| Materials Testing and Protection |
| 1. |
Altrasonic Thickness Gauge |
No. |
1 |
| |
| For corrosion and surface defects test of metallic and non-metallic materials and any other
good ultrasonic wave conductor as along as it has parallel top and bottom surfaces accurately
display readings after a simple calibration to a thickness or sound relocity.
|
|
|
|
| 1.a |
Recommended TR probes for corrosion measurements: |
No. |
2 |
| |
Dialog probe, 5MHz, range 1.2 –ca. 200mm in steel |
|
|
| |
Dialog probe, 2MHz, range 5 –ca. 300mm in steel |
|
|
| |
Dialog probe, 0.8MHz, from ca. 7mm, for highly attenuative materials |
|
|
| 1.b |
Recommended TR probes for measurements at high temperatures (range for DMS2): |
No. |
2 |
| |
High temperature probe, 5MHz, range 4-ca. 60mm |
|
|
| |
High temperature probe, 5MHz, range 1-ca. 300mm in steel for contact temperature up to 530c |
|
|
| 1.c |
Recommended TR probes for special test tasks (range for DMS2): |
No. |
2 |
| |
miniature wall thickness probe, 10MHz, range 0.7-ca.12mm in steel, with reduced contact face of(high) 3mm, cable 1.5m |
|
|
| |
Pencil probe, 10MHz, range 0.7-ca.12mm in steel with reduced contact face of (high) 3mm, cable 1.5m |
|
|
| |
Dialog probe, 7.5MHz, range 0.7 –ca. 50mm in steel, remote control key cable 1.2m |
|
|
| 1.d |
Recommended probes for precision measurement in single element mode: |
No. |
2 |
| |
Delay line probe, 15MHz, range 0.25-25mm in steel |
|
|
| |
Contact probe probe, 10MHz, range 2.0-250mm in steel |
|
|
| 1e. |
Recommended Cables: |
No. |
2 |
| |
Probe cable 1.5m long, for dialog probe, 5MHz, range 1.2 –ca. 200mm in steel |
|
|
| |
Probe cable 1.5m long, for miniature wall thickness probe, 10MHz, range 0.7-ca. 12mm in steel, with reduced contact face of (high) 3mm, cable 1.5m |
|
|
| |
Probe cable 1.5m long, for DA305 with highly flexible steel sheeting |
|
|
| |
Probe cable 1.5m long, for HT400A, tightly screwed with highly flexible stainless steel sheeting |
|
|
| |
Cable 2m for Delay line probe, 15MHz, range 0.25-25mm in steel |
|
|
| 1f. |
Recommended Accessories: |
No. |
2 |
| |
Set(4) NiMH batteries, 1.2V/1.2Ah |
|
|
| |
Charger for NiCd and NiMH batteries, 230V |
|
|
| |
Plugin power unit 100-24-v |
|
|
| |
Stepped calibration block steel 8steps 1-8mm |
|
|
| 1g. |
Application software and recommended accessories for documentation: |
No. |
2 |
| |
Serial data transfer cable from the instrument to the pc or printer with GCH 1 OR GCH 3 |
|
|
| |
Gender change for the connection of the TGDL/PC cable to SEIKO DPU 414 |
|
|
| |
Thermal printer for mains and battery operation |
|
|
| |
Gender change for the connection of the TGDL/PC cable to Epson LX/FX |
|
|
| |
Matrix printer for mains operation, single sheet and continuous sheet operation |
|
|
| |
Parallel printer cable |
|
|
| |
standard evaluation and documentation program |
|
|
| |
USB-Cable |
|
|
| 2. |
Universal Hardness Tester: |
No. |
1 |
| |
| 1 to 250 kg, with measurement screen for Vickers, Brinell, Rockwell and Ball indentation
hardness testing, including specimen clamp. With 90mm table.
|
|
|
|
| |
Vickers: HV1 |
|
|
| |
HV100 – Knoop : HK1 |
|
|
| |
Brinell: HBW 1 / 1, 1 / 30, 2, 5 / 5, 15, 2 / 5 / 187, 5, 5 / 25, 7 / 250, 10 / 10, 10 / 251 |
|
|
| |
Rockwell: HR Scale A, B, C, D, E, F, G, H, K, 15N, 30N, 45N, 15T, 30T, 45T |
|
|
| |
Ball Indentation: HR 49.03 N / 132, 39 N / 357, 9 N / 961, 0 N |
|
|
| |
1 to 250 kg, with measurement screen for Vickers, Brinell, Rockwell and Ball indentation hardness testing, including specimen clamp. With 90mm table |
|
|
| 2a. |
Floor table suitable for item 2 |
No. |
1 |
| 2b. |
Vickers Pyramid indenter 136°, with official calibration certificate |
No. |
1 |
| 2c. |
Rockwell diamond 120°, with official test certificate |
No. |
1 |
| PET/121 |
| Equipment for oil well drilling work shop with training |
| 1. |
Fishing Tools |
|
|
| 1a. |
Knuckle Joint |
|
|
| |
7 1\4 IN. OD. lebus full hole control with 11 5\16 IN. OD. X 2 1\16 OD. restriction plug over shot assembly and furnished with 5 1\2 regular tool joint box top and pin bottom connection |
NO. |
1 |
| |
7 3\4 IN. OD. X 2 3\4 ID.type of thread 6 5\8 regular |
|
|
| 1b. |
Bumper Sub |
NO. |
1 |
| 1c. |
Over shot Bowen releasing and circulating over shot, maximum catch 6 1/2 IN. with: |
NO. |
1 |
| |
Basket Grapple Type |
NO. |
1 |
| |
Spiral Grapple Type |
NO. |
1 |
| 1d. |
Mechanical Jar |
NO. |
1 |
| |
7 3\4 IN. OD. X 2 3\4 IN. ID. type of thread 6 5\8 regular |
NO. |
1 |
| 1e. |
Hydraulic Jar |
NO. |
1 |
| |
7 3\4 IN. OD. X 2 3\4 IN. ID. type of thread 6 5\8 regular |
|
|
| 1f. |
Junk Basket |
NO. |
1 |
| |
for 8 1\2 hole furnished with 4 1\2 API reg. or if connection includes lifting sub and junk catcher |
|
|
| 1g. |
Bowen reverse circulation junk basket: |
NO. |
1 |
| |
for 8 1\2 hole furnished with 4 1\2 API reg. or if connection includes lifting sub and junk catcher |
|
|
| 1h. |
Bowen fully operational external cutter: |
NO. |
1 |
| |
7 7\8 IN. OD. X 6 3\8 IN. ID. complete with spring dog assembly to engage under square shoulder of tool joint with 5 knives to cut 3 1\2 IN. to 5 IN. OD. DP. to be used with 8 1\2 IN. hole and furnished with 5 1\2 IN. API reg. connection |
|
|
| 1i. |
Bowen over size guide: |
NO. |
1 |
| |
7 7\8 IN. OD. X 6 3\8 IN. ID. complete with spring dog assembly to engage under square shoulder of tool joint with 5 knives to cut 3 1\2 IN. to 5 IN. OD. DP. to be used with 8 1\2 IN. hole and furnished with 5 1\2 IN. API reg. connection |
|
|
| |
to be connected with 8 1\2 IN. over shot series 150 |
|
|
| 1j. |
Free Point Indicating Device: |
NO. |
1 |
| |
Fully operational to measure the free length of stuck pipe complete |
|
|
| 1k. |
Internal Cutter: |
NO. |
1 |
| |
for 9 5\8 IN. casing |
|
|
| 1_l. |
Internal pressure pipe cutter: |
NO. |
1 |
| |
for 9 5\8 IN. casing |
|
|
| 1_m. |
Rope fishing over shot: |
NO. |
1 |
| |
for 9 5\8 IN. casing |
|
|
| 1_n. |
Rope fishing spear: |
NO. |
1 |
| |
for 9 5\8 IN. casing |
|
|
| 1_o. |
Taper Tap: |
NO. |
1 |
| |
for 5 IN. DP |
|
|
| 1_p. |
Die Collar: |
NO. |
1 |
| |
for 5 IN. DP: |
|
|
| 1_q. |
Pin Tap: |
NO. |
1 |
| |
for 5 IN. DP: |
|
|
| 1_r. |
Full Circle releasing spear: |
NO. |
1 |
| |
for 5 IN. DP: |
|
|
| 1_s. |
Junk Sub: |
NO. |
1 |
| |
for 8 1/2 IN. Hole |
|
|
| 1_t. |
Wall Hook: |
NO. |
1 |
| |
for fishing in 8 1/2 IN. hole |
|
|
| 1_u. |
Wash Over Pipe: |
NO. |
1 |
| |
for 5 IN. DP. |
|
|
| 1_v. |
Wash Back Off Tool: |
NO. |
1 |
| |
for 5 IN. DP. |
|
|
| 1_w. |
Safety Joint: |
NO. |
1 |
| |
for drilling in 8 1/2 hole |
|
|
| 1_x. |
Chemical Cutter: |
NO. |
1 |
| |
equipment for running in hole |
|
|
| 1_y. |
Rubber Finger Stabilizer: |
NO. |
1 |
| |
Retrievable for 8 1\2 hole |
|
|
| 1_z. |
Spear Point Head: |
NO. |
1 |
| |
Extra for 2 3\4 IN. OD. |
|
|
| 1_aa. |
Sealing Packer Rubbers: |
NO. |
2 |
| 1_ab. |
Milling Tools: |
NO. |
1 |
| |
Set includes all types for 8 1\2 IN hole |
|
|
| 1_ac. |
Bowen Fishing Magnet: |
NO. |
1 |
| |
for fishing in 8 1\2 IN hole |
|
|
| 1_ad. |
Bowen Lead Impression Block: |
NO. |
1 |
| |
for 8 1\2 IN hole |
|
|
| 2. |
G0 - Devil Hole Deviation Measuring Tool: |
NO. |
1 |
| |
MD \ Totco fully operational for 5 IN. DP. 0-8 degree double recorder to be freely dropped in DP. for recovery, complete assembly |
|
|
| 3. |
Thread and Tool joint sections: |
NO. |
1 |
| |
Showing all types of thread used in tubular goods 50 CM lengths with all available types of API threads |
|
|
| |
1 - 8 IN Drill Collar |
NO. |
1 |
| |
2 - 7 IN Casing |
NO. |
1 |
| |
3 - 5 IN Drill Pipe |
NO. |
1 |
| 4. |
Miscellaneous: |
|
|
| |
All catalogues, manuals required and cds which show each items operation & maintenance: |
|
|
| |
Training on manufacturers area before shipment for 2 persons for 2 weeks including accommodation, full board, commuting travel expenses & transportation from Iraq to training site & vise versa for all items |
|
|
| |
Origin: USA or Europe |
|
|
| |
All above equipment must be brand new & unused |
|
|
| PET/124 |
| Oil Well Drilling Equipment, Casing and Drill Stem Test (DST) |
| 1. |
Casing string equipment consists of: |
|
|
| 1a. |
Differential Fill Up Shoe: |
NO. |
1 |
| |
for 9 5\8 IN. casing plus sectioned model scale 1:1 |
|
|
| 1b. |
Differential Fill Up Shoe: |
NO. |
1 |
| 1c. |
Differential Fill Up Float Collar: |
NO. |
1 |
| |
for 9 5\8 IN. casing plus sectioned model scale 1:1 |
|
|
| 1c. |
Stage Cementing Collar: |
NO. |
1 |
| |
for 9 5\8 IN. casing plus sectioned model scale 1:1 with opening and closing plugs |
|
|
| 1d. |
Stab In Shoe 13 3\8 IN. casing: |
NO. |
1 |
| |
plus sectioned model equiped with spring - loaded flapper type float valves scale 1:1 |
|
|
| 1e. |
Stab In Cementing Collar: |
NO. |
1 |
| |
for 13 3\8 IN. casing plus sectioned model equiped with spring - loaded flapper type float valve scale 1:1 |
|
|
| 1f. |
Stab-In Unit: |
NO. |
1 |
| |
for with centralizer and flexible latch plug to be used with Item NO. (1.4, 1.5) above, run with 5 IN. OD. DP. |
|
|
| 1g. |
Casing Scraper: |
NO. |
1 |
| |
for 7 IN. casing or liner complete assembly with top and bottom types |
|
|
| 1h. |
Centralizer: |
NO. |
1 |
| |
Hevi-Duty super hinge centralizer (HSH) to run on 7 IN. OD. casing in 8 1\2 hole |
NO. |
1 |
| |
Super hinge centralizer (HSH) to run on 9 5\8 IN. OD. casing in 12 1\4 IN. hole |
NO. |
1 |
| 1i. |
Scratchers: |
|
|
| |
Hinge-Lock wall scratcher to run on 7 IN. OD. casing IN 8 1\2 IN. hole |
NO. |
1 |
| |
Rotating wall scratcher to run in 9 5\8 IN. OD. casing in 12 1\4 IN. hole |
NO. |
1 |
| 1j. |
Liner Equipment: |
NO. |
1 |
| |
Complete 4 1\2 IN liner equipment consists of 4 1\2 liner hanger equipment to be hunged in side 7 IN casing 20 lb\ft includes: |
|
|
| 1a. |
Double inverted cup, complete assembly |
|
|
| 1b. |
Mechanical liner hanger, complete assembly |
|
|
| 1c. |
Hydraulic liner hanger, complete assembly |
|
|
| 2a. |
Full Up Set Shoe |
|
|
| 3a. |
Landing Collar |
|
|
| 4a. |
Liner Swivel |
|
|
| 5a. |
Setting Collar: |
|
|
| 5a1. |
With receptacle |
|
|
| 5a2. |
With profile |
|
|
| 6. |
Packer |
|
|
| 7. |
Packoff Bushing |
|
|
| 7a. |
retrievable packoff bushing |
|
|
| 7b. |
drillable packoff bushing |
|
|
| 8. |
Double inverted swab assembly |
|
|
| 9. |
running and setting tools, complete assembly |
|
|
| 2. |
Drill Stem Test Equipment Simulator |
NO. |
1 |
| |
D.S.T. tools string complete used inside 9 5\8 IN. casing and in 8 1\2 IN. open hole consists of: |
|
|
| 2a. |
Down hole tools: |
NO. |
1 |
| 2b. |
Perforated Anchor: |
|
|
| 2b. |
Pressure recorder: |
|
|
| 2c. |
packers for 8 1\2 IN. open hole & inside 9 5\8 IN. casing: |
|
|
| 2d. |
safety seal for 8 1\2 IN. open hole only: |
|
|
| 2e. |
Safety Joint |
|
|
| 2f. |
Hydraulic Jar |
|
|
| 2g. |
By Pass Valve |
|
|
| 2h. |
Multi Flow Evaluator (MFE) |
|
|
| 2i. |
Reverse Circalating Valve |
|
|
| 2i. |
Reverse Circalating Valve |
|
|
| 2i. |
Surface equipment: |
|
|
| 2i. |
Control Head: |
|
|
| 2i. |
Floor Manifold |
|
|
| 2i. |
Steel Flow Hose with all supplements and accessories |
|
|
| 2i. |
Scanner for D.S.T. chart reading with the following items: |
|
|
| 2i. |
Digital Display System: |
|
|
| 2i. |
Direct interface through the digital system to (PC) to store data and computer results |
|
|
| 2i. |
Video accurasy to show chart on T.V. monitor (21 IN.) plasma |
|
|
| 2i. |
Installation and operation are required |
|
|
| 3. |
All catalogues, manuals required and cds shows each items operations |
|
|
| 3. |
Training on manufacturer area before shipment for 2 persons for 2 weeks including accommodation, full board, commuting travel expenses & transportation from Iraq to training site & vise versa for all items |
|
|
| 3. |
Origin: USA or Europe |
|
|
| R/207 |
| 1. |
Automatic Distillation Analyzer & Data Acquisition Software |
Set |
1 |
| |
A sample is evaporated & condensed under controlled conditions, & observations are made of
the temperatures at which various percentages are recovered and/or the percentages
recovered at specified temperatures, the device is used to determine the boiling
characteristics of gasoline, fuels oil & other mineral oil products under atmospheric pressure |
|
|
| |
Specifications: |
|
|
| |
-Temperature Range 0 to 450ºC |
|
|
| |
-Accuracy 0.1ºC |
|
|
| |
-Condenser -5 to 60ºC |
|
|
| |
-Receiver chamber 0 to 60ºC |
|
|
| |
-Power Supply (220-240)V |
|
|
| |
-PC requirements P-3 minimum, the software operates under windows, communication port RS-232 dimensions about 21*22*28 CM |
|
|
| 2 |
Automatic Sulphur Analyzer |
Set |
1 |
| |
For determination of sulphur content in crude oil & petroleum products |
|
|
| |
Range 0.001 to 6% wt |
|
|
| |
power supply 220v/50hz |
|
|
| 3. |
Salt in Crude Oil Test Method Analyzer |
Set |
1 |
| |
This test method covers the determination of salts in crude oil |
|
|
| |
Voltage: 220-240v |
|
|
| |
Power: 150 watts |
|
|
| |
Dimensions: 360*320*140mm |
|
|
| 4. |
Reid Vapor Pressure for Hydrocarbon Liquid with water bath |
Set |
1 |
| |
ASTM D-323/72 |
|
|
| Note |
Each item above requires the following: |
|
|
| 1 |
Instructions, exercise & maintenance manuals in english |
|
|
| 2 |
All accessories & spare parts two years |
|
|
| 3 |
Training courses on the manufactures site before shipment for two weeks for two persons |
|
|
| 4 |
Installation & operation on site |
|
|
